Test item 測試名稱：Water Supply — Tap Ware 水提供設備—分接器具Test info 測試內容：ClauseTest Re 普通1.4Size designation 尺寸設定1.5Marking re 商標要求1.6Installation instruction 安裝說明2Material 材料3Design and manufacture 設計與工藝3.2End connectors 末端連接3.3Spindles 錠子3.4Screw threads 螺紋3.5Water shut-off device 水流開關設計3.6Jumper valve 回跳閥3.7Thickness of metal parts 金屬部件厚度3.8Fabricated assemblies 結構本體3.9Outlets 出口3.1Operating mechanisms 操作機械3.11Finish and workmanship 表觀工藝3.12Accessories or components supplied with tap products 水龍頭的附件及配件3.13Taps and tap components to suit industry-specific dimensional characteristics 水龍頭及其配件的尺寸要求4Performance res 性能要求4.2Plastic materials used for plastic-bodied tap 塑料水龍頭的塑料材料4.3Hydraulic strength test 靜壓測試4.4Resistance to bending moment (for surface-mounted tap) 抗彎矩4.5Watertightness under pressure 壓力下的水密性4.6Nominal flow rate 普通流量4.7Contamination of water 水污染ue of fabricated joints 連接扭力ue of handle attachment 把手扭力ue of head to body ue of operating mechanism 操作機械扭力4.12Endurance test for taps and taps components (single handle mixed tap) 水龍頭及其配件的耐久性 （單柄機械混合水龍頭）4.13Strength of connector nut and assembly 連接螺母及配件的強度4.14strength of button-operated and foot-operated taps 按鈕操作以及腳踏操作的強度4.15resistance of handle to removal把手移動強度Sample required: 5 sets of completed products with assembly instruction (if applicable) .   樣品要求: 全套樣品5套并包括安裝說明書(如適用) .Turnaround time: Normal (12 working days)    所需時間: 標準(12個工作天) Sample for reference 參考圖片: Sample Report 報告樣本：